Home > All Products > Air Stream Dryer > XSG Spin Flash Airflow Drier
SKU: #cj0008

XSG Spin Flash Airflow Drier

Description:

This drying machine is one kinds of airstream dryer. The hot air enters into the bottom of the dryer in tangent direction and forms a powerful rotating wind with the driving of the stirrer. The paste-like materials enter into the dryer through the vane feeder and are dispersed by the striking, friction and shearing force produced by powerful stirring of the high-speed rotary stirring paddle, The lump materials will soon be smashed heated and dried after contacting the hot air fully .

  • Product Detail
  • Send Inquiry

Working Principle

This drying machine is one kinds of airstream dryer. The hot air enters into the bottom of the dryer machine in tangent direction and forms a powerful rotating wind with the driving of the stirrer. The paste-like materials enter into the dryer through the vane feeder and are dispersed by the striking, friction and shearing force produced by powerful stirring of the high-speed rotary stirring paddle,  The lump materials will soon be smashed heated and dried after contacting the hot air fully . The dried materials after dehydration will go up with the hot air with its big particles trapped by the grading ring. Small particles will be discharged out of the drying machine from  center ring and then collected in the cyclonic separator and dust collector. The not-fully-dried or big pieces of materials will be slammed to the wall by centrifugal force and smashed again for drying after they fall down to the bottom.

Characteristics

Airstream dryer integrates rotary flow, fluidization, spouting and stage reduction technologies. The equipment is compact and small in size, high in productivity .It is "a small equipment for large production" which can perform continuous production.

It has high drying strength, low energy consumption and high heat efficiency.

With short stay for materials and quality finished products, the machine can be used for drying heat sensitive materials.

For the negative pressure or the micro-negative pressure operations, the machine is good for its tightness and high efficiency so as to eliminate the environmental pollution.

Material to be dried

Organic compounds:

Fenatrol (insecticide of agrochemicals), cadmium laurate, benzoic acid, germicide, sodium oxalate, cellulose acetate.

Dyestuff:

Anthraquinone, black ferric oxide, indigo blue pigment, butyric acid titanium hydroxide, zinc sulfuration, all kinds of intermediate of azo dry-stuff.

Inorganic compounds:

Borax, calcium carbonate, hydroxide, copper sulphide, ferric oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, kinds of heavy metallic salt, synthetic cryolite.

Foodstuff:

Soya protein, agglomerative starch, lees, triticin, wheat starch

Technical Parameters

Type

Body Diameter(mm)

Main Machine Power(kw)

  Gas Volume(m3/h)

Water Evaporation(kg/h)

Occupied Area(m2)

XSG-2

200

0.75-2.2

300-800

10-20

3500*2500

XSG-3

300

3-4

600-1500

20-50

3800*2700

XSG-4

400

4-7.5

1250-2500

25-70

4000*3000

XSG-5

500

5.5-11

1500-4000

30-100

4200*3200

XSG-6

600

7.5-18.5

2500-5000

40-200

4250*3250

XSG-8

800

11-18.5

3000-8000

60-600

4500*3500

XSG-10

1000

15-30

5000-12500

100-1000

4750*3750

XSG-12

1200

15-37

10000-20000

150-1300

5000*4000

XSG-14

1400

30-55

14000-27000

200-1600

5250*4250

XSG-16

1600

45-75

18700-36000

250-2000

5500*4500

 

Material

Accelerant ZDC

Oil-soluble Ink

Manganese Zinc Acid

Phthaleins Draghead

Calcium Citrate

Superfine Calcium Carbonate

Mud Conditioner

Dioxygen Cyanuric Acid

Cyanuric Acid Trioxide

Air  Inlet  Temperature 

150

150

120

150

140

160

200

180

150

Initial  Moisture  Content         

60

45

30

55

40

70

75

25

30

Final  Moisture  Content   

0.5

2

1.0

1.0

1.0

1.5

5

0.2-2

1.0

Actual  Drying  Capability 

80-110

350-380

120-150

160-180

300-350

430-470

290-310

80-120

90-150

Note:

1. Water evaporation refers to the amount of moisture evaporated per hour when the air inlet temperature is 180℃ and the air outlet temperature is 80℃.

2. Besides the models above, the dryers can be specially designed upon request.

3. The installed capacities above are standard sets. The power will vary with different materials.

*Indicates a required field.